Top of the page

FAAC 106753.5E - 770 In-Ground Hidden Single Swing Gate Opener Kit (14ft/ 1100 lbs.)

Item No. 106753.5E
The 770 low voltage gate operator from FAAC is an in-ground operator that won't hinder the appearance of your driveway. Opens and closes swing gates up to 10 ft long and 1,110 lbs. Kit Includes: (1) 770 Operator (1) Support Box (1) Power Supply (1) E024U Control Board (1) 14 x 16 Enclosure (2) Batte

Description

The 770 low voltage gate operator from FAAC is an in-ground operator that won't hinder the appearance of your driveway. Opens and closes swing gates up to 10 ft long and 1,110 lbs.

Kit Includes:
  • (1) 770 Operator
  • (1) Support Box
  • (1) Power Supply
  • (1) E024U Control Board
  • (1) 14 x 16 Enclosure
  • (2) Batteries 12V 8 Ah
  • (1) Receiver 433 RC Plug-In
  • (2) 4-Channel Transmitters XT4 433 RC
Features:
  • Invisible installation
  • Access the operator without removing the leaf
  • Protection class IP 67
  • Nonreversible design
  • Optional 140 Degrees and 180 Degree opening kits
  • Maximum safety thanks to the E024U control board reverse on contact feature
  • Built in battery backup to ensure operation in case of power outage
  • UL325 Listed
Specifications:
  • Input Voltage for Gate Actuator: 24 DC
  • Input Voltage for Gate Controller: 110/115/120 AC (60 Hz, 1 Phase)
  • Power: 70 W
  • Current: 3 A
  • Max Torque: 221 lbf.ft (300 Nm)
  • Reduction Ratio: 1:1418
  • Angular Speed: 6 Degrees /s
  • Max Opening Angle: 110 Degrees (140 Degrees and 180 Degree with optional kit)
  • Leaf Max. Width: 10 ft (3 m)
  • Leaf Max. Weight: 1100 lb (500 Kg)
  • Operating Ambient Temperature: -4 Degrees F to 131 Degrees F (-20 Degrees C to +55 Degrees C)
  • Use Frequency: Continuous
  • Operator Dimensions (L x D x H): 14 x 6 x 5.5 in (360x150x140 mm)
  • Support Box Dimensions (L x D x H): 17 x 12 x 8 in (430x307x214 mm)
  • Protection Class: IP 67
Interested in turning this single gate operator into a dual gate system? To make a Primary/Secondary (bi-parting) kit, add the following parts:

770 gate operator only (part number 10675315)
Support box (part number 490065)
AWG 12 2-conductor cable for operator (part number 2197)
This product is a direct replacement for the FAAC 106753.5E+.

Specifications

Vendor Item No.
106753.5
Item Category Code
SWING

FAAC 106753.5E - 770 In-Ground Hidden Single Swing Gate Opener Kit (14ft/ 1100 lbs.)

Item No. 106753.5E
The 770 low voltage gate operator from FAAC is an in-ground operator that won't hinder the appearance of your driveway. Opens and closes swing gates up to 10 ft long and 1,110 lbs. Kit Includes: (1) 770 Operator (1) Support Box (1) Power Supply (1) E024U Control Board (1) 14 x 16 Enclosure (2) Batte

Description

The 770 low voltage gate operator from FAAC is an in-ground operator that won't hinder the appearance of your driveway. Opens and closes swing gates up to 10 ft long and 1,110 lbs.

Kit Includes:
  • (1) 770 Operator
  • (1) Support Box
  • (1) Power Supply
  • (1) E024U Control Board
  • (1) 14 x 16 Enclosure
  • (2) Batteries 12V 8 Ah
  • (1) Receiver 433 RC Plug-In
  • (2) 4-Channel Transmitters XT4 433 RC
Features:
  • Invisible installation
  • Access the operator without removing the leaf
  • Protection class IP 67
  • Nonreversible design
  • Optional 140 Degrees and 180 Degree opening kits
  • Maximum safety thanks to the E024U control board reverse on contact feature
  • Built in battery backup to ensure operation in case of power outage
  • UL325 Listed
Specifications:
  • Input Voltage for Gate Actuator: 24 DC
  • Input Voltage for Gate Controller: 110/115/120 AC (60 Hz, 1 Phase)
  • Power: 70 W
  • Current: 3 A
  • Max Torque: 221 lbf.ft (300 Nm)
  • Reduction Ratio: 1:1418
  • Angular Speed: 6 Degrees /s
  • Max Opening Angle: 110 Degrees (140 Degrees and 180 Degree with optional kit)
  • Leaf Max. Width: 10 ft (3 m)
  • Leaf Max. Weight: 1100 lb (500 Kg)
  • Operating Ambient Temperature: -4 Degrees F to 131 Degrees F (-20 Degrees C to +55 Degrees C)
  • Use Frequency: Continuous
  • Operator Dimensions (L x D x H): 14 x 6 x 5.5 in (360x150x140 mm)
  • Support Box Dimensions (L x D x H): 17 x 12 x 8 in (430x307x214 mm)
  • Protection Class: IP 67
Interested in turning this single gate operator into a dual gate system? To make a Primary/Secondary (bi-parting) kit, add the following parts:

770 gate operator only (part number 10675315)
Support box (part number 490065)
AWG 12 2-conductor cable for operator (part number 2197)
This product is a direct replacement for the FAAC 106753.5E+.

Specifications

Vendor Item No.
106753.5
Item Category Code
SWING

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.