Linear MCS109920 - Multi-code 1-Channel 110V Gate Receiver
Item No. LIN 1099-20
Loading
The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as
Description
The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used.
The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a multi-code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
The Model 109920 is compatible with 300 MHz multi-code transmitters only.
Features
The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a multi-code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
The Model 109920 is compatible with 300 MHz multi-code transmitters only.
Features
- Operates on 115 VAC power
- One channel
- Whip antenna
- Codes: 1,024 (set by dip switches)
- RF frequency: 300 MHz
- Dimensions: 3.625" W x 5.25" H x 1.5" D
Specifications
- Vendor Item No.
- MCS109920
Loading
Linear MCS109920 - Multi-code 1-Channel 110V Gate Receiver
Item No. LIN 1099-20
The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as
Description
The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used.
The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a multi-code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
The Model 109920 is compatible with 300 MHz multi-code transmitters only.
Features
The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a multi-code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
The Model 109920 is compatible with 300 MHz multi-code transmitters only.
Features
- Operates on 115 VAC power
- One channel
- Whip antenna
- Codes: 1,024 (set by dip switches)
- RF frequency: 300 MHz
- Dimensions: 3.625" W x 5.25" H x 1.5" D
Specifications
- Vendor Item No.
- MCS109920