Mobotix MX-F-S7A-INT01 - S74 IO Slide in Board
Item No. MOB MX-F-S7A-INT01
Line Out Headphones with 20mW @ 16 Ohm or 32 Ohm. Audio inputs as a Line Out function to 10k Ohm impedance of receiver. Audio level while connected to 10k Ohm equals -10dbV Line In Standard Line In: (0dB) Vrms=1V SPK 0,9W at any 8 Ohm speaker. MOBOTIX Audio module: 0,9W at 8 Ohm MIC Passive micropho
Description
Line Out
- Headphones with 20mW @ 16 Ohm or 32 Ohm.
- Audio inputs as a Line Out function to 10k Ohm impedance of receiver. Audio level while connected to 10k Ohm equals -10dbV
- Standard Line In: (0dB) Vrms=1V
- 0,9W at any 8 Ohm speaker.
- MOBOTIX Audio module: 0,9W at 8 Ohm
- Passive microphone to connect (for best results). R_Bias for the microphone is 2.2 kOhm (included on the camera). Microphone impedance < 2.2 kOhm, Operating voltage of the microphone is 2V.
- Sensitivity of the MOBOTIX Audio Module: -35 +/-4dB (0dB = 1V/pa, 1kHz)
- Contact Closure (no galvanic isolation necessary) or up to 50V AC/DC
- max. length for cables: 50m
- requires pull-up resistor and external power supply (10mA / max. 50V DC - no AC)
- Output may be loaded with max. 50mA
- max. length for cables depends on loop impedance of the connected cable.
Specifications
- Vendor Item No.
- MX-F-S7A-INT01
- Item Category Code
- SURVEILLANCE
Mobotix MX-F-S7A-INT01 - S74 IO Slide in Board
Item No. MOB MX-F-S7A-INT01
Line Out Headphones with 20mW @ 16 Ohm or 32 Ohm. Audio inputs as a Line Out function to 10k Ohm impedance of receiver. Audio level while connected to 10k Ohm equals -10dbV Line In Standard Line In: (0dB) Vrms=1V SPK 0,9W at any 8 Ohm speaker. MOBOTIX Audio module: 0,9W at 8 Ohm MIC Passive micropho
Description
Line Out
- Headphones with 20mW @ 16 Ohm or 32 Ohm.
- Audio inputs as a Line Out function to 10k Ohm impedance of receiver. Audio level while connected to 10k Ohm equals -10dbV
- Standard Line In: (0dB) Vrms=1V
- 0,9W at any 8 Ohm speaker.
- MOBOTIX Audio module: 0,9W at 8 Ohm
- Passive microphone to connect (for best results). R_Bias for the microphone is 2.2 kOhm (included on the camera). Microphone impedance < 2.2 kOhm, Operating voltage of the microphone is 2V.
- Sensitivity of the MOBOTIX Audio Module: -35 +/-4dB (0dB = 1V/pa, 1kHz)
- Contact Closure (no galvanic isolation necessary) or up to 50V AC/DC
- max. length for cables: 50m
- requires pull-up resistor and external power supply (10mA / max. 50V DC - no AC)
- Output may be loaded with max. 50mA
- max. length for cables depends on loop impedance of the connected cable.
Specifications
- Vendor Item No.
- MX-F-S7A-INT01
- Item Category Code
- SURVEILLANCE