SG Barrier Gate Operators

Width: 15″
Height: 40 1/2″
Depth: 15 1/2″
Weight: 200 lbs.

Anti-Entrapment/Detection Devices:
Operator is pre-wired to accept contact and non-contact detection devices such as reverse edges and/or photo electric eyes

Warning Signals:
Pre-start audio/visual outputs provided

Options:
230V, single-phase operation
Powdercoated stainless steel cabinet for installations in areas where high concentration of corrosive material is present
Thermostatically-controlled strip heater
Arm signal light kit

Mechanical:
Dual V-belt drives
Heavy-duty 75:1 right-angle oil bath gear reduction
Heavy-duty harmonic link with oil impregnated bronze bushings

SG Barrier Gate Operators

The Model SG barrier gate is designed to control industrial vehicular traffic. The gate can be actuated by different devices, such as radio controls, single- and three-button control stations, digital keypads, coded cards, sensing loops and telephone entry systems. The Model SG barrier gate can be used for large industrial vehicular traffic. For high-use applications on wide driveways, it is recommended to use two model BGU 12, one on each side of the driveway. The Model SG barrier gate control system is designed to accept most available entrapment devices and has function switches that will allow for various methods of control


Cabinet:
Weather-resistant galvannealed steel cabinet with powder coat finish
Lockable and removable front access panel for easy access

Electrical:
1/2 hp, 115 VAC, single-phase, thermally-protected, open-frame, resilient-mount PSC motor
Power on/off switch
Duplex receptacle (115 VAC units only)
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable cam-operated limit switches
Full system connections for access controls and reversing devices

osco_barrier_sglayout

Control Circuit:
Solid state circuit board, 24-volt AC or DC
Inherent current sensing system
15 LEDs for easy setup and troubleshooting
Built-in maximum run timer and auto close timer
Master/Slave – simple three-wire connection

Gate Arm:
Heavy-duty wishbone style
Available in lengths from 16 to 25 feet
Constructed of 1×6″ soft wood, painted white with yellow and black warning tape and warning labels on each side
Includes appropriate counterweight system