Linear SWR-211 - Single Phase Swing Gate Opener (1/2 HP / 115 Volt)
Item No. LIN SWR-211
Loading
Linear SWR-211 Single Phase Swing Gate Opener (1/2 HP / 115 Volt) This residential swing gate operator features the APeX control board, a heavy duty chassis and a lockable door. For gates up to 17 ft and 500 lbs. Specifications : 1/2 HP, 115V 1 Phase Max gate size: 17 ft, 500 lbs Drive type: Crank M
Description
Linear SWR-211 Single Phase Swing Gate Opener (1/2 HP / 115 Volt)
This residential swing gate operator features the APeX control board, a heavy duty chassis and a lockable door. For gates up to 17 ft and 500 lbs.
Specifications:
Features:
APeXâ„¢ Controller
Electrical/Mechanical:
Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
This residential swing gate operator features the APeX control board, a heavy duty chassis and a lockable door. For gates up to 17 ft and 500 lbs.
Specifications:
- 1/2 HP, 115V 1 Phase
- Max gate size: 17 ft, 500 lbs
- Drive type: Crank
- Maximum duty cycle: 150 cycles per day
- 5 Year Warranty
Features:
APeXâ„¢ Controller
- Black polyethylene cover
- Built-in MegaCode receiver
- Quick disconnect crank assembly
- Exterior reset button
- ETL Listed for UL 325 (Class I-IV) for U.S. and Canada
Electrical/Mechanical:
Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
- Continuous-tone entrapment alarm with reset button
- LED diagnostic display for ease of setup and troubleshooting
- Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
- Regulated 24 Volt DC power available for access control accessories
- Integrated maximum run and auto close timer (0-9 minutes)
- Built-in networked dual gate capability using 3-wire shielded cable
- Heavy-duty, zinc-plated, steel chassis
- Lockable steel access door
- Universal pad mount standard; optional post mount kit
Specifications
- Vendor Item No.
- SWR-211
- Item Category Code
- SWING
Loading
Linear SWR-211 - Single Phase Swing Gate Opener (1/2 HP / 115 Volt)
Item No. LIN SWR-211
Linear SWR-211 Single Phase Swing Gate Opener (1/2 HP / 115 Volt) This residential swing gate operator features the APeX control board, a heavy duty chassis and a lockable door. For gates up to 17 ft and 500 lbs. Specifications : 1/2 HP, 115V 1 Phase Max gate size: 17 ft, 500 lbs Drive type: Crank M
Description
Linear SWR-211 Single Phase Swing Gate Opener (1/2 HP / 115 Volt)
This residential swing gate operator features the APeX control board, a heavy duty chassis and a lockable door. For gates up to 17 ft and 500 lbs.
Specifications:
Features:
APeXâ„¢ Controller
Electrical/Mechanical:
Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
This residential swing gate operator features the APeX control board, a heavy duty chassis and a lockable door. For gates up to 17 ft and 500 lbs.
Specifications:
- 1/2 HP, 115V 1 Phase
- Max gate size: 17 ft, 500 lbs
- Drive type: Crank
- Maximum duty cycle: 150 cycles per day
- 5 Year Warranty
Features:
APeXâ„¢ Controller
- Black polyethylene cover
- Built-in MegaCode receiver
- Quick disconnect crank assembly
- Exterior reset button
- ETL Listed for UL 325 (Class I-IV) for U.S. and Canada
Electrical/Mechanical:
Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
- Continuous-tone entrapment alarm with reset button
- LED diagnostic display for ease of setup and troubleshooting
- Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
- Regulated 24 Volt DC power available for access control accessories
- Integrated maximum run and auto close timer (0-9 minutes)
- Built-in networked dual gate capability using 3-wire shielded cable
- Heavy-duty, zinc-plated, steel chassis
- Lockable steel access door
- Universal pad mount standard; optional post mount kit
Specifications
- Vendor Item No.
- SWR-211
- Item Category Code
- SWING